Ultimate Wireless Connectivity
Bookmark and Share

Firmware / MIB Updates & Downloads

Firmware

Trango provides free firmware upgrades for all products. Each downloadable firmware release package contains the firmware, release notes, and upgrade instructions. Each radio's main firmware version can be found on the System Information page, via the telnet command 'sysinfo'.

More Downloads

Firmware Downloads

To download firmware, click the download (Download) link in the Revision column.

Point-to-Point
Product Revision Notes
TrangoLINK-45
P5055M		 v2.0r2 Notice: For US and OE models only. For IC models, please use previous revision in archived firmware.

Resolved Issues:
- Improvement to VLAN for management access
- Reset power settings after reboot
- Incorrect result display between Avg dBm and Peak dBm after site survey through HTTP
- Allow administrator to disable auto rate shifting

Enhancements:
- Allow administrator to ignore DFS signal (OE version only)
   rdrignore [on|off] - default is off
- "[Elapse]" for DFS's cac in "sysinfo"
- "autoscanmu" for RU
Atlas 5010
P5010M		 v3.0r1 New Features:
- Added CLI command to change http port
- Added CLI command to change telnet port

- Changed 5.3 GHz functionality per FCC regulations
Learn More »
TrangoLINK-10
MU & RU		 v3.1r1 Enhancement: Increased upper limit of heater's range
Point-to-MultiPoint
Product Revision Notes
Access5830
AP & SU 		v3.1r1 Enhancement: Increased upper limit of heater's range
Atlas FOX
M5580M-FSU		 v2.0r13 Resolved Issues:
- Fix bugs in changing scan table during auto-scan mode or during frequency change
- RSSI LEDs lighted up in opmode off mode
- CLI command showed the incorrect AP to SU Error percentage
- System uptime displaying incorrect time
- CLI testrflink command showed the incorrect received packet count

Enhanced:
- ARQ engine to handle duplicate and out-of-sequence re-transmit packets
- RSSI values when running rssi in CLI
- Association time with access point
Fox Series SU
M5800S-FSU
M5800S-FSU-D
M5800S-FSU-D2
M5300S-FSU		 v2.0r2 Resolved Issues:
- Not activating opmode after reboot
- Incorrect RSSI values on D2 only

New Features:
- Support ARQ
- D2 only command to adjust power output effecting RSSI values
Fox Series SU
M5800S-FSU
M5800S-FSU-D
M5300S-FSU		 v05070502 FPGA S: AP drops frames/packets from short range SU-Foxes
M2400S
AP & SU		 v06022101 FPGA S: AP/SU: Fixed switching horizontal/vertical polarization.
M900S
AP & SU		 v2.1r1 Resolved issues: AP reboots
Enhanced:
- Rx packets
-SNMP and ARQ
New Feature: Command to disable and enable SNMP engine
v0612400 FPGA Prevents uploading incorrect firmware between M900S and M915S units
M915S SU only v2.1r1
Firmware &
v0612400 FPGA		 Resolved firmware issues:
- ARQ engine fixed
NOTE: no changes to FPGA -- original file


 

SNMP MIBs

Trango provides proprietary Management Information Bases (MIBs) for its products for use with SNMP management programs. To download MIBs, click the download (Download) link in the Revision column.

MIB Packages

MIB Downloads
Product Revision
Atlas 5010 v1.2r2
M2400S v1.1
M900S v1.3
TrangoLINK-10 1.0 - v1.04
Access5830 v1.0 - v1.14
Access5800 v1.64