Ultimate Wireless Connectivity
Bookmark and Share
Trango Falcon PLUS - 5.8 GHz High-Performance Wireless Analog Video Transmission Solution

Falcon PLUS™ (VTX5900/VRX5950)

5.8 GHz Wireless Analog Video/Audio Transmitter/Receiver Radios

  • Range up to 7 miles
  • 12 User-selectable channels
  • Data pass-through mode
  • Energy saving standby mode
  • Stereo audio transmission
  • NTSC/PAL with 460 lines horizontal resolution
  • 30 Frames per second
  • Rugged all-weather construction, NEMA 4X rated
  • Dual Virtual Wire™ contact closures with discrete outputs

Ultimate 5.8 GHz Analog Video Performance

The Falcon PLUS™ is a simple, cost-effective, and field-proven 5.8 GHz analog wireless video transmission solution which delivers high-resolution, real-time, full-motion video up to seven miles line-of-sight at a fraction of the cost of fiber networks. Operating in the unlicensed 5.8 GHz ISM band, the Falcon PLUS™ offers unmatched wireless video performance and a ready-to-install solution for hard-to-reach, remote PTZ or fixed cameras. When using more than 6 sets of Falcon PLUS systems in the same area use a mix of right and left hand polarized antenna sets. Since you will not be able to separate the frequency channels by at least one other channel you will need the opposite polarized antennas to achieve more separation.

The system is capable of transmitting two channels of audio or single-channel audio along with two Virtual Wire™ contact closures. Sensors, alarms, and detectors can be wired to the transmitter to take advantage of this feature. In data pass-through mode Falcon PLUS also functions as a wireless, single-direction data transmitter that can provide mono audio transmission while passing RS232 at data rates from 1200 to 9600 baud with provisions for RS422 and RS485 through the use of our optional LC485/422 module. Using the data pass-through mode it is possible to control PTZ cameras, but you will need an additional Falcon PLUS transmitting in the opposite direction (see Configuration Note #6).

By integrating the Falcon PLUS wireless video system into the complete CCTV or traffic monitoring solution, integrators and installers save the inconvenience and high cost of stringing fiber to every camera location. And, through the use of the 5.8 GHz band with polarized antennas, this audio and video transmitter delivers a crystal clear video picture with maximum immunity to interference.

Secure Standby Mode

The Falcon PLUS also features a proprietary Secure Standby mode which, when enabled, allows the system to go into "sleep" mode until an alarm input is detected. Not only does this feature save power in battery-dependant (or solar powered) applications, but it also eliminates all radio-frequency output, rendering the system undetectable to frequency monitoring. With all of these features, it is no wonder the Falcon PLUS has been utilized in a wide variety of security video surveillance and broadcasting applications.

5.8 GHz License Exempt Frequency

The Falcon PLUS™ is FCC and Industry Canada approved and requires no path license.

Three 5.8 GHz Systems to Choose From

Range Receiver Antenna Gain
1 mile AD5900-15 15 dBi
4 miles AD5900-27 27 dBi
7 miles AD5900-30 30 dBi

Antenna Datasheets

For details on choosing which type of antenna polarization to use, see Antenna Polarization and Positioning for Analog Wireless Systems.

Request Documents & Info

Learn More...

Contact Trango: +1 (858) 391-0010

The Falcon PLUS™ is ideal for:

What's Included

Falcon PLUS 5.8 GHz
7-Mile, 4-Mile or 1-Mile Systems
  • VTX5900 5.8 GHz Transmitter
  • VRX5950 5.8 GHz Receiver
  • AD5900-15-RP 15 dBi Patch Antenna (Tx)
  • One of the following:
    • AD5900-30-R 30 dBi Prime Feed Dish Antenna (Rx) for 7-mile system
    • AD5900-27-R 27 dBi Prime Feed Dish Antenna (Rx) for 4-mile system
    • AD5900-15-R 15 dBi Patch Antenna (Rx) for 1-mile system
  • Power Adapters
  • Mounting Hardware

5.8 GHz Analog Video System - Specifications
Range 7 Miles Line-of-sight (with 30 dBi receiver antenna)
RF Output Power Per FCC part 15.249
Current Draw 220 mA typ., 30mA standby (TX), 500mA typ. RX
Input Voltage 7-12 Vdc (7 Vdc nominal)
Video bandwidth 5.8 MHz
Input Impedance 75 Ohms
Video Connector BNC-F
Audio Input 1 Vpp line level
Input Impedance 600 Ohms
Audio Bandwidth 50 Hz - 15 KHz
Audio Connector RCA-F
Data Connector RJ11
Relay Contact 4 position terminal block, 2 inputs
Radio Dimensions 4.6" x 8.8" x 2.5" (11.7 cm x 22.4 cm x 6.4 cm)
Temp Range -22° to +158° F ( -30° to +70° C )
Mounting Wall or pole up to 2 3/8" diameter